info@nb-joyometal.com    +86-574-82181444
Cont

Have any Questions?

+86-574-82181444

Aug 26, 2025

How to choose the right cutting tools for CNC machining parts?

Hey there! As a supplier of CNC machining parts, I've seen firsthand how crucial it is to pick the right cutting tools for the job. Whether you're a newbie in the CNC world or a seasoned pro, getting this choice right can make or break your project. So, let's dive into how you can choose the perfect cutting tools for CNC machining parts.

Material Matters

First things first, the material of the part you're machining plays a huge role in tool selection. Different materials have different properties, like hardness, toughness, and heat resistance. And these properties determine what kind of cutting tool will work best.

Let's start with metals. Metals are some of the most common materials in CNC machining. For example, aluminum is a popular choice because it's lightweight, easy to machine, and corrosion-resistant. When machining aluminum, you'll want to use high-speed steel (HSS) or carbide cutting tools. Carbide tools are especially great because they're super hard and can withstand high cutting speeds. Check out our OEM Alloy 2024 Aluminum And Stainless Steel CNC Service for more info on machining aluminum parts.

On the other hand, stainless steel is a lot tougher than aluminum. It's harder, more heat-resistant, and tends to work-harden during machining. This means you need a cutting tool that can handle the extra stress. Carbide tools with a special coating are often the way to go. The coating helps reduce friction and heat, which can extend the tool's life and improve the surface finish of the part.

Plastics are another common material in CNC machining. They're lightweight, inexpensive, and can be easily molded into different shapes. When machining plastics, you can use HSS or carbide tools, but you need to be careful not to overheat the material. Plastics can melt or deform if they get too hot, so it's important to use a low cutting speed and plenty of coolant.

Cutting Tool Geometry

The geometry of the cutting tool is also important. The shape of the tool affects how it cuts through the material, the amount of force it applies, and the surface finish it produces.

One of the most important aspects of tool geometry is the rake angle. The rake angle is the angle between the cutting edge of the tool and the workpiece. A positive rake angle means the cutting edge is slanted towards the direction of cutting. This makes the tool easier to cut through the material, but it also makes the cutting edge weaker. A negative rake angle means the cutting edge is slanted away from the direction of cutting. This makes the cutting edge stronger, but it also requires more force to cut through the material.

Another important aspect of tool geometry is the clearance angle. The clearance angle is the angle between the flank of the tool and the workpiece. It's important to have a sufficient clearance angle to prevent the tool from rubbing against the workpiece, which can cause friction, heat, and tool wear.

The number of flutes on the cutting tool is also important. Flutes are the grooves on the tool that help remove the chips from the cutting area. A tool with more flutes can remove chips more quickly, which can increase the cutting speed. However, a tool with more flutes also has less space between the flutes, which can make it more difficult for the chips to escape. This can lead to chip clogging, which can cause the tool to overheat and break.

Tool Coating

Tool coating is a thin layer of material that's applied to the surface of the cutting tool. The coating can improve the tool's performance in several ways. It can reduce friction, increase hardness, improve wear resistance, and prevent the tool from sticking to the workpiece.

There are several different types of tool coatings available, each with its own advantages and disadvantages. Titanium nitride (TiN) is one of the most common coatings. It's hard, wear-resistant, and has a low coefficient of friction. This makes it a great choice for general-purpose machining.

OEM Alloy 2024 Aluminum And Stainless Steel CNC ServiceOEM Master Brack Cylinder In CNC Machine Working

Titanium carbonitride (TiCN) is another popular coating. It's harder and more wear-resistant than TiN, and it also has a lower coefficient of friction. This makes it a good choice for high-speed machining and machining of difficult-to-cut materials.

Diamond-like carbon (DLC) is a relatively new coating that's becoming more popular. It's extremely hard, wear-resistant, and has a very low coefficient of friction. This makes it a great choice for machining non-ferrous materials, like aluminum and plastics.

Cutting Conditions

The cutting conditions, such as cutting speed, feed rate, and depth of cut, also affect the choice of cutting tools. You need to choose a tool that can handle the cutting conditions you're using.

Cutting speed is the speed at which the cutting tool moves relative to the workpiece. It's usually measured in surface feet per minute (SFM) or meters per minute (m/min). The cutting speed depends on the material of the workpiece, the material of the cutting tool, and the type of machining operation. In general, you can use a higher cutting speed with a harder cutting tool and a softer workpiece material.

Feed rate is the rate at which the cutting tool advances into the workpiece. It's usually measured in inches per revolution (IPR) or millimeters per revolution (mm/rev). The feed rate depends on the material of the workpiece, the material of the cutting tool, the cutting speed, and the type of machining operation. In general, you can use a higher feed rate with a harder cutting tool and a softer workpiece material.

Depth of cut is the thickness of the layer of material that's removed by the cutting tool in one pass. It's usually measured in inches or millimeters. The depth of cut depends on the material of the workpiece, the material of the cutting tool, the cutting speed, the feed rate, and the type of machining operation. In general, you can use a larger depth of cut with a harder cutting tool and a softer workpiece material.

Cost and Availability

Of course, cost and availability are also important factors to consider when choosing cutting tools. You want to choose a tool that fits your budget and is readily available when you need it.

Some cutting tools can be quite expensive, especially if they're made from high-quality materials or have a special coating. However, investing in a good quality tool can save you money in the long run. A high-quality tool will last longer, produce better results, and require less frequent replacement.

Availability is also important. You don't want to be stuck waiting for a tool to arrive when you have a project deadline. Make sure you choose a tool that's readily available from your supplier.

Conclusion

Choosing the right cutting tools for CNC machining parts is a complex process that involves considering several factors, such as the material of the workpiece, the geometry of the tool, the tool coating, the cutting conditions, and the cost and availability. By taking the time to understand these factors and making an informed decision, you can ensure that you choose the best tool for the job.

If you're interested in our OEM CNC Machining Aluminum Alloy Parts or OEM Master Brack Cylinder In CNC Machine Working, or if you have any questions about choosing the right cutting tools for your CNC machining projects, don't hesitate to contact us. We're here to help you make the best choices for your business.

References

  • Boothroyd, G., & Knight, W. A. (2006). Fundamentals of machining and machine tools. CRC Press.
  • Kalpakjian, S., & Schmid, S. R. (2009). Manufacturing engineering and technology. Pearson Prentice Hall.
  • Trent, E. M., & Wright, P. K. (2000). Metal cutting. Butterworth-Heinemann.

Send Inquiry